Finally, we are able to bring our customers replacement motors. These Board Bumpers 5065 150KV Evolve Repalcement GT/GTX motors are the exact specs as the stock (OEM) motors currently used on all Evolve GT & GTX boards. They are directly interchangeable. Just unplug and remove your old motor. Plug the new one in, mount it and you’re ready to ride!
Other similar motors are available on the market in 140kv and 200kv. But these kv ratings do not match with the tuned Evolve electronics. 140kv motors don’t provide the same RPM / top speed as the 150kv motors. Both motors on the board will need to be replaced if using 140kv or 200kv as the motor RPM wont match with the stock setup. The 200kv motors provide a higher RPM but this comes at a cost of battery efficiency as they require 11amps more power to drive each motor. This means a total additional output of 22amps when using 200kv, which will affect your boards range
significantly. The best fit for the Evolve
GT & GTX are the 5065 150kv motors!
EVOLVE REPLACEMENT GT/GTX MOTOR:
- 5065 150KV Sensored Brushless Motor
- One Motor
- Safe to replace just 1
- Includes 1 15T Motor Gear
- Compatible with GT models
- Compatible with GTX models
Installation is simple! Just remove your stock drive gears from your wheels and reinstall. 3-6 included spacers may be required for proper fitment. In addition, if using MBS or Trampa wheel hubs install your chosen hub adapters into the wheels, followed by mounting them onto the board. Loving the fact you are able to customize your electric skateboard? Why stop! Check out more accessories to complete your electric board here: BOARD BUMPERS