Bronson Alexis Ramirez Pro Speed Bearings G3 Smoke features ‘Deep Groove’ Raceways. As a result, this means the balls sit and roll deeper in the raceway channels than weaker shallow groove designs. Reduces axial and angular side impact damage and breakage, surfaces stay smooth and fast.
Non-contact rubber shields fit deep in the inner race edge to help reduce oil leaks and prevent dirt & moisture intrusion. The rubber shields are free spinning, durable, pop off resistant shields, serviceable, remove-able, easy to clean and re-install.
Go Fast, Stay Fast ‘Micro Groove’ Raceway Surfaces provides a self smoothing microscopic linear grooved raceway surfaces improve bearing lubrication and spin. The micro grooves increase spin by eliminating the standing wave of lubricant just in front of the rolling ball.
Strong, non-distortion glass filled nylon cage keep the balls precision spaced and oil circulating. Ball cage socket surfaces engineered to hold oil and provide continuous ball lubrication.
For optimum high speed performance install bearing with the designated balls-out/cage-in orientation (black pinstriped shields facing outside of wheel). Results in a go fast, stay fast bearing that spins longer by reducing shield and cage contact on impact.
These G3 bearings come pre-lubricated with a special blend of high speed ceramic oil for a fast and smooth roll right out of the package. This oil is blended with nano-ceramic compounds for anti-wear protection for longer lasting bearings and improved speed. Light and smooth, with additives that resist rust, moisture, corrosion and oxidation for prolonged oil life.
Shred Ready Factory Fresh Quality 100% hand inspected twice and micro-polished & ultrasonic solvent washed 3X prior to final lubrication. Packaged in nitrogen filled shrink-wrap – reduces metal and oil oxidation until ready to be ridden.
NO SMOKE WITHOUT FIRE! Roll up and GO FAST on Pedro Delfino’s & Alexis Ramirez NEW Pro G3 Bearings!
BRONSON BEARINGS: For the last 35 months NHS, Inc. has been researching, testing and prototyping with the goal to completely reinvent a skateboard product that has lacked any real innovation for over thirty years – the bearing.
