We are proud to announce the brand new Evolve Abec 11 F1 Street Wheels to bring a whole new level to your Electric Board riding!
These bad boys are ready to take your Evolve Electric Skateboard to the track! They feature a large 107mm diameter, a contact patch of 55mm and a durometer of 74a. Overall these characteristics come together, to produce nothing but an exceptional wheel to overcome just about anything.
Evolve recommends the 38T drive gear with use of these wheels. In addition, you are still capable of using the standard 32T Evolve drive gears. The standard Evolve 32T drive gears will work with these wheels, however you may notice a significant loss of low-end torque. Overall, the 38 tooth gear will brake faster but the 32 tooth will give you a faster speed overall (but slightly less braking performance).
With use of this wheel, you will need to remove belt covers for clearance. In addition, at this time, the remote does not currently have a 107mm wheel setting, so current speed display will not be accurate.
WARNING! The F1 107mm wheel size can increase your board’s top speed significantly. Always wear proper protective gear, and only ride as fast as your skating skills and local laws allow!
EVOLVE ABEC 11 F1 STREET WHEELS:
- Diameter: 107mm
- Contact patch: 55mm
- Durometer: 74a
- Compatible with 32T Drive Gear
- 38T Drive Gear Recommended
In terms of specs – The wheel is 107mm in diameter and 55mm in width. It uses the 74A Urethane Reflex formula that ABEC 11 is famous for, giving you a super soft ride. A complete set of wheels weighs about 2kg (4.4 pounds). This wheel does fit on most of our Evolve electric skateboards including the Carbon GT, Bamboo GT, GTX and ONE board. It will also work on our older Gen 1 Carbon and Gen 2 Bamboo but it won’t be compatible with the pintail and snub-nose due to wheel bite. Two things to note – the belt covers won’t fit on the board if your are using the 107mm wheels so you will need to take them off but we do have a new belt cover coming in the next few weeks that will be compatible. The GT remote also doesn’t have a 107mm setting but we will be updating this shortly.