Take your Evolve Skateboard to the next level with the Riptide Evolve Dual Kingpin Bushing Box!
The kit is designed for electric skateboards that use dual kingpin trucks. This Evolve Bushing Kit consists of Krank formulated bushings. The Krank formula is highest rebound formula to date.
It is designed specifically to change under pressure and is controlled by the amount of clamp pressure you subject it to when tightening the kingpin nut! The effective range of control is from barely snug for the loosest feel to 2 full turns for the tightest feel. In addition, this bushing kit also includes Riptide WFB pivot cups!
This kit contains all you need to take your trucks from zero to hero, minus the skate tool. The kit has pivot cups, bushings and washers to upgrade your truck to the best hardware available. With 25% more turn and more stability, Riptide bushings give you unparalleled control over your ride.
We found the key to settling down your trucks is to keep the pair of secondary bushings stiffer than the primary bushings. When adjusting compression, start with the Secondary bushings first. The primary pair should initiate the turn, then the secondary pair should come into play when needed or wanted. This box setup provides agility and stability for your board.
Please refer to the following table to get your Evolve Trucks fitted with the suggested setup. Of course, you can always experiment with your setup to find what you prefer.
When reading this table, bushing locations are referred to as Front 1-4 and Rear 1-4. Front 1 refers the bushing closest to the board, with Front 4 being the closest bushing to the road.
RIPTIDE EVOLVE DUAL KINGPIN BUSHING BOX:
- Includes 9 Krank bushings
- Includes 4 WFB 96a pivot cups
- Washers included with bushings
- Designed for Dual kingpin trucks
- Dial in your trucks the way you like!
- More bushings here: RIPTIDE
All about my bushing set-up and why I chose RipTide over anything else. They’re just the best!